Wi-Fi monitoring: Analyze your wireless network with PRTG
- Analyze every aspect of your wireless networks
- Keep track of devices, traffic, availability & signal strength
- Detect Wi-Fi overloads and fix them immediately
Our users give top ratings for monitoring with Paessler PRTG
Why choose PRTG WiFi monitoring
- Wi-Fi monitoring with PRTG: Keep an eye on the following 5 aspects
- What Wi-Fi monitoring looks like in PRTG
- 4 reasons why PRTG is the Wi-Fi monitoring tool of your choice
- LAN, Wi-Fi, WAN – keep an eye on your entire network connectivity with PRTG
- More than just a Wi-Fi monitoring software: Maintain a reliable IT infrastructure with PRTG
- Wi-Fi monitoring: FAQ
PRTG makes Wi-Fi monitoring easy
Custom alerts and data visualization make it easy to monitor, identify, and prevent Wi-Fi issues.
Wi-Fi monitoring with PRTG: Keep an eye on the following 5 aspects
How PRTG defines sensors
In PRTG, “sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, e.g. the traffic of a switch port, the CPU load of a server, the free space of a disk drive. On average you need about 5-10 sensors per device or one sensor per switch port.
Device status: Is your hardware available?
Are your routers really online at all times? Or are there times when a router (and thus your Wi-Fi) is repeatedly not available? With Paessler PRTG, you can monitor both uptime and downtime – simply set up sensors like the SNMP Uptime v2 sensor or the Ping v2 sensor, for example.
Load: Is your wireless network strained?
Wi-Fi disruptions often occur when the network load is too high, which means that the quality of your connection will suffer. With the preconfigured bandwidth sensors in PRTG, you can quickly identify the moments when your wireless network is most strained and adapt your capacity planning accordingly.
Traffic: Who is using your bandwidth?
How many data packets travel over an access point? How much bandwidth is used by specific data? With the SNMP Traffic sensor or the SNMP Cisco ASA VPN Traffic sensor, for example, you'll stay up-to-date on your Wi-Fi traffic as well as all other network traffic.
Signal strength: Are there weak spots in your building?
Do co-workers often complain about the Wi-Fi connection in specific office areas? This could mean that the signal strength of certain routers is not what it should be – eventually, you will need to replace routers or invest in additional access points. A neat way to check the signal strength of your wireless network with PRTG is to query it with an SNMP Custom Advanced sensor.
Last access: Which devices are used when?
To always keep an eye on network security, set up custom SNMP sensors and check the last time a device was connected to the wireless network. This way, you can make sure that no unauthorized access takes place, particularly during out-of-office hours. The collected data is also helpful to analyze overall WiFi usage over a longer period.
What Wi-Fi monitoring looks like in PRTG
Diagnose issues with your wireless network by continuously monitoring your devices, bandwidth, and availability. Show Wi-Fi usage in real time and visualize data in graphic maps & dashboards to identify problems more easily. Gain the visibility you need to troubleshoot your Wi-Fi issues.
Custom dashboard for monitoring the entire IT infrastructure
Wi-Fi traffic monitoring with PRTG
Sunburst view of your entire monitoring setup
Start Wi-Fi monitoring with PRTG and see how it can make your network more reliable and your job easier.
“All-around winning “The real beauty of PRTG is the endless possibilities it offers” “Outstanding cloud IT experts agree: Paessler PRTG is a great solution for IT infrastructure monitoring
network monitor”
monitoring”
4 reasons why PRTG is the Wi-Fi monitoring tool of your choice
Monitor status & performance of your wireless network
With our Wi-Fi analyzer PRTG, you can easily keep track of the status of your wireless network and maintain an overview of all devices connected via Wi-Fi. Wi-Fi traffic monitoring, Wi-Fi bandwidth monitoring, Wi-Fi usage monitoring, analyzing network speed and the signal strength of each router – PRTG has got you covered.
Set up Wi-Fi monitoring fast with preconfigured sensors
PRTG offers built-in sensors with which you can monitor your wireless network effortlessly. Our automatic network discovery feature intelligently creates a set of sensors for the devices it finds in your network after the initial installation. This saves you valuable time and makes setting up PRTG a breeze.
Receive customizable alerts and notifications
Whether there’s an issue with your wireless devices, routers, or any other problem in your network – PRTG will immediately alert you of the issue via customizable notifications. Set, for example, individual error thresholds that trigger alerts, configure detailed alerting rules, and select your preferred notification method, such as email, SMS, or push notifications.
Visualize & analyze your Wi-Fi network on custom dashboards
Are there areas in your buildings with a bad Wi-Fi signal? What is the average Wi-Fi bandwidth? Ask yourself these questions to find out, for example, if a complete network upgrade is necessary or if a more efficient distribution of existing resources might be sufficient. PRTG can give an answer to all these questions with the help of its detailed, customizable maps, dashboards, and historical data.
LAN, Wi-Fi, WAN – keep an eye on your entire network connectivity with PRTG
LAN monitoring
LAN monitoring is the basis for a reliable, high-performance network. This is why it’s important to keep an eye on your workstations, routers, switches, servers, bandwidth & more at all times and detect connectivity issues and performance bottlenecks as early as possible. Check out LAN monitoring with PRTG.
Wireless network monitoring
Today, it’s not uncommon to bring your own mobile devices to the office and connect them to the company network via Wi-Fi. In addition, laptops are often used for presentations in conference rooms and likewise require smooth Wi-Fi access. As a result, wireless network monitoring quickly becomes an important issue for administrators.
WAN monitoring
Wide area networks are particularly susceptible to crashes and disruptions because they are distributed over buildings, countries, and even continents. At the same time, lots of important data (such as emails or VoIP telephony/) flows across a WAN. Getting started with monitoring can therefore truly be a lifesaver. Check out WAN monitoring with PRTG.
Easily find the source of the problem with our PRTG Wi-Fi analyzer
Real-time alerts and custom notifications make Wi-Fi network troubleshooting easy.
More than just a Wi-Fi monitoring software: Maintain a reliable IT infrastructure with PRTG
There can be many reasons why your internet connection is down or not very reliable at all. This makes it all the more important that wireless network monitoring is always only one component of your entire monitoring setup. Check out other aspects that you should keep an eye on when monitoring your IT infrastructure.
Internet accessibility
Does your internet connection work only most of the time? The problem could actually lie with your service provider and not with your routers, switches, or access points. Use the Common SaaS sensor to monitor websites like YouTube which are usually never down to keep an eye on internet connectivity.
Disruptions in email traffic
Nothing makes co-workers complain faster than if they can’t send or receive any emails. In such a case, the LAN or wireless network may be the culprit. However, email issues can also occur due to problems with SMTP or POP3. PRTG includes a variety of preconfigured mail server monitoring sensors, for example, the SMTP&POP3 Round Trip sensor.
Website availability
A website that loads very slowly or an online shop that’s not reachable at all can quickly become business-critical and more often than not results in money loss. The Cloud Ping v2 and the Cloud HTTP v2 sensor make sure that your websites are available from all around the world.
PRTG is compatible with all major vendors, products, and systems
Your WiFi monitoring at a glance – even on the go
Set up PRTG in minutes and use it on almost any mobile device.
Easily find the source of the problem with our PRTG Wi-Fi analyzer
Real-time alerts and custom notifications make Wi-Fi network troubleshooting easy.
Create innovative solutions with Paessler’s partners
Partnering with innovative vendors, Paessler unleashes synergies to create
new and additional benefits for joined customers.
Oliver Jähn, IT Manager at the University of Bonn
“For us, PRTG Network Monitor is the most effective tool for monitoring our IT infrastructure in the long run.”
Wi-Fi monitoring: FAQ
1. What is a Wi-Fi monitoring tool?
A Wi-Fi monitoring tool, or Wi-Fi analyzer, is a software application used to analyze and optimize wireless networks, specifically those using the Wi-Fi protocol. It provides detailed information about the Wi-Fi signal strength, network congestion, channel interference, and other factors that affect the performance of a wireless network.
By using a Wi-Fi analyzer & monitoring tool, you can:
- View available Wi-Fi networks
- Analyze signal strength
- Identify channel interferences
- Measure wireless network performance
- Troubleshoot wireless network problems
- Optimize network setup
2. Why is Wi-Fi monitoring important?
Wi-Fi monitoring is crucial because it allows you to ensure the optimal performance and reliability of your wireless network. By monitoring Wi-Fi, you can identify and troubleshoot connectivity issues, detect interference sources, monitor network usage, and ensure proper bandwidth allocation. It helps in maintaining a stable and efficient Wi-Fi environment for users and makes sure that potential problems are identified and resolved promptly.
3. What types of Wi-Fi issues can be detected with PRTG?
PRTG helps you detect and resolve a wide range of Wi-Fi issues. Some common problems that can be identified include:
- weak signal strength
- channel interferences
- network congestions
- device connectivity issues
- unauthorized access points
- configuration errors
PRTG provides real-time data and historical analysis, which enables administrators to pinpoint the root causes of problems and take appropriate actions.
4. What is a sensor in PRTG?
In PRTG, “sensors” are the basic monitoring elements. One sensor usually monitors one measured value in your network, for example the traffic of a switch port, the CPU load of a server, or the free space on a disk drive.
On average, you need about 5-10 sensors per device or one sensor per switch port.
PRTG: The multi-tool for sysadmins
Adapt PRTG individually and dynamically to your needs and rely on a strong API:- HTTP API: Access monitoring data and manipulate monitoring objects via HTTP requests
- Custom sensors: Create your own PRTG sensors for customized monitoring
- Custom notifications: Create your own notifications and send action triggers to external systems
- REST Custom sensor: Monitor almost everything that provides data in XML or JSON format
PRTG makes Wi-Fi monitoring easy
Custom alerts and data visualization make it easy to monitor, identify, and prevent Wi-Fi issues.
We asked: would you recommend PRTG?
Over 95% of our customers say yes!
Paessler AG conducted trials in over 600 IT departments worldwide to tune its network monitoring software closer to the needs of sysadmins.
The result of the survey: over 95% of the participants would recommend PRTG – or already have.
Paessler PRTG is used by companies of all sizes. Sysadmins love PRTG because it makes their job a whole lot easier. Bandwidth, servers, virtual environments, websites, VoIP services – PRTG keeps an eye on your entire network. Everyone has different monitoring needs. That’s why we let you try PRTG for free.Still not convinced?
More than 500,000
sysadmins love PRTG
Monitor your entire IT infrastructure
Try Paessler PRTG
for free
Start Wi-Fi monitoring with PRTG and see how it can make your network more reliable and your job easier.
|
PRTG |
Network Monitoring Software - Version 24.2.94.1400 (April 10th, 2024) |
|
Hosting |
Download for Windows and cloud-based version PRTG Hosted Monitor available |
Languages |
English, German, Spanish, French, Portuguese, Dutch, Russian, Japanese, and Simplified Chinese |
Pricing |
Up to 100 sensors for free (Price List) |
Unified Monitoring |
Network devices, bandwidth, servers, applications, virtual environments, remote systems, IoT, and more |
Supported Vendors & Applications |
|
Combining the broad monitoring feature set of PRTG with IP Fabric’s automated network assurance creates a new level of network visibility and reliability.